NNP

Clipped Planchet.  An imperfectly punched blank or planchet in which the metal strip (from which blanks are punched) did not advance far enough under the blanking punch and "clipped" a portion of a previous hole. Clipped planchets range from only a small percentage of the total blank missing to crescent shaped pieces with 60% or more missing. In production blanking all blanks are fed into a riddling drum in which such malformed blanks drop out and full-circle blanks are passed on to the next process. These clipped and imperfectly formed planchets – called scissel – are melted and reprocessed.

If the positioning of strip is near the edge or end of the strip this could cause a

straight edge clip (less common). If the edge had not been machined straight this could cause a ragged edge clip. More dramatic perhaps are multiple clips that exist when this error of positioning occurs in two (double clipped), three or (rarely) four places. (More than four are impossible.)

An elliptical or oval clip is the name given to a struck piece on an oval (instead of circular) planchet. It occurs when the blank does not fall into the hopper but rests instead on he strip and is planked with the next planchet, it is not full round but is cut into two pieces – one oval and one crescent – either or both of which may end up being fed into the coining press.

When a clipped planchet is struck into a coin or medal, metal flows over the edge of the clip forming minute overhang at the rim/edge juncture.  Counterfeit clips – intended for collectors – have been made by shearing off small circular portions after the item is struck, but this can be detected by the sharp angular corners without the overhang at the rim/edge juncture.  See blanking.

excerpted with permission from

An Encyclopedia of Coin and Medal Technology

For Artists, Makers, Collectors and Curators

COMPILED AND WRITTEN BY D. WAYNE JOHNSON

Roger W. Burdette, Editor

excerpted with permission from

An Encyclopedia of Coin and Medal Technology

For Artists, Makers, Collectors and Curators

COMPILED AND WRITTEN BY D. WAYNE JOHNSON

Roger W. Burdette, Editor

excerpted with permission from

An Encyclopedia of Coin and Medal Technology

For Artists, Makers, Collectors and Curators

COMPILED AND WRITTEN BY D. WAYNE JOHNSON

Roger W. Burdette, Editor